Making round tube fit in a square hole!

---

Make your own die to use in a press. Can be made in any size shape or form, this is just to give you an idea.

Shop Tools

---

Simple machine to bend and shape square tubing.

---

A simple formula that allows us to measure the deflection at the end of a piece of tubing being bent by force F, while the other end of the tubing is fixed.

---

This welding table was built almost entirely from the scrap yard. It has adjustable feet made from new 3/4" NF nuts and bolts, the only new items on it. I had some plugs left over from drilling 2 inch holes in 1/4" plate, sanded them up smooth and welded them to the bolt head. In...

---

Spreader to assist in the removal or reassembly of the front spring in Ford type axles..

Hydraulic and cheap!

---

If most of you are like me, the cost of a tubing bender makes you cringe. $1000 plus once you have a die or two, and its still manual. Well theres a way around the big cost. I spent under $350 building mine, and its completely hydraulic. Plans can be had from Frank Takacs @ Got Trikes. ...

---

Free Plans for a Tube Bender

---

Rear Axle, drop -out 3rd member holder for engine stand.

---

Longer than normal Engine leveler , used on Straigt 6's and old style extended blocks.

---

Ok, I'll be the "Bald Headed Step Child" and the first to post a thread here...:razz: Some have asked about the Rear Axle Dolly I made so I will post the pics here and a little information about the build. Material: I used some 4" Steel Channel as I had some left over from a...