[sampanjohn]

I am working on getting a Spirit body ready for paint. Some of the low areas by the mold seams are 1/4 inch deep. Looking for technique/materials to fill these low spots.

Thanks

John

[butch27]

To: quote Chester-" Bondo is our friend" LOL

[Francis Blake]

Any good brand of bondo is good for fill sand the area real rough with 40 grit sandpaper I like to put a little kitty hair in the mix and don't fill more than 1/8 inch deep at a time let it set till it's hard sand it good and finish filling. Good luck with your project.

[dovehunter79]

Francis Blake, on 24 November 2009 - 09:24 AM, said:

Any good brand of bondo is good for fill sand the area real rough with 40 grit sandpaper I like to put a little kitty hair in the mix and don't fill more than 1/8 inch deep at a time let it set till it's hard sand it good and finish filling. Good luck with your project.

When I rebuild my motorcyle, I used duraglass to fill in the big holes and then used bondo filler for the tiny ones.